Bagged Concrete, Mortar & Repair

Cement Suppliers in Scotts Valley, CA

Q: What's the Difference Between Cement and Concrete?

Cement is an ingredient; concrete is the finished material. Concrete is a composite of cement, aggregates, and water, and the cement acts as the binder holding it together. Cement itself is produced by heating limestone and clay to form clinker, then grinding it. Concrete is the most widely used construction material in the world, and cement is the key ingredient in it.

Q: What Is Portland Cement?

Portland cement is the standard ingredient in nearly all concrete and mortar. It conforms to ASTM C150 specifications, which set the composition and performance requirements each bag must meet. It hardens through a chemical reaction with water rather than by drying, which is why proper curing matters more than air temperature on most pours.

Q: Do Your Products Meet California Code and Seismic Requirements?

Building materials sold in California have to comply with state building codes for quality and safety, and cement mixes on a structural job need to meet local seismic design standards. Bring your engineer's specification and we will match products to what it calls for.

Q: How Does Aggregate Quality Affect a Pour?

Directly. Aggregate makes up most of the volume in concrete, so its quality drives the durability of the finished pour more than people expect. Clean, well-graded material produces stronger, more consistent concrete.

Q: What Are Blended and Portland-Limestone Cements?

Blended cements combine Portland cement with supplementary materials, which lowers the environmental impact of the finished product. Portland-limestone cement cuts carbon emissions considerably during production, and ASTM standards cover both performance and sustainability across the category.

Q: How Do I Use a Concrete Calculator to Estimate Bags?

Multiply length by width by depth, convert the total to cubic feet, and divide by the yield printed on the bag. Run the numbers through our concrete calculator before you visit, and round up—a second trip costs more than an extra bag.

Q: Do You Carry Concrete Tools?

Mixing tubs, trowels, floats, and screeds in the same aisle as the material, including heavy-duty equipment built to take a full batch without flexing. Buying the tools where you buy the bags saves a second stop and the waste that comes with the wrong-sized tub.

Q: Do You Carry Concrete Repair Products?

Yes. Anchoring cement for railings, posts, and bolts, Water-Plug for active leaks, vinyl patch and resurfacer for worn or spalled surfaces, self-leveling compound in regular and fast-setting, and cold-mix blacktop patch for driveways and lots. Repairing a surface costs a fraction of replacing it.

Q: Do You Sell to Contractors and Homeowners?

Both. Contractors get pallet quantities and delivery scheduling that fits a build calendar. Homeowners get time, a straight answer on which of two similar bags is right, and no minimum order.

Standard Mixes and High-Strength Products in Stock
Repair, Color, and Heavy-Duty Concrete Tools in Stock
Forklift Delivery, Not Curbside

Trusted Cement & Masonry Experts Helping Scotts Valley Customers Build with Confidence

Central Home Supply stocks bagged concrete, mortar, thinset, and repair products at our Scotts Valley yard. Contractors pick up by the pallet, and homeowners pick up by the bag. Our inventory is for anyone setting a post, pouring a slab, laying veneer, or patching a driveway. We cover the categories we stock, how to match a mix to the load, when bagged options stop making sense, and what customers ask most.

As a family-owned business for over 50 years, we serve this county with 2,500+ quality products in a variety of sizes. If you do not see what you need on the shelf, we can bring in most non-stocked items by special order.

Bagged central home supply - santa cruz ca

When You Need Ready Mix Instead

Bagged concrete makes sense up to a point. Past a few cubic yards, hand-mixing stops being practical, and a ready-mix truck delivered from a batching plant is the better call. Ready-mix carries its own clock—concrete begins setting almost immediately once water hits cement, and a truck typically has to discharge within about 90 minutes of batching, making logistics part of the plan. We will tell you when you have crossed that line rather than sell you forty bags you will regret.

Cement, Mortar, and Concrete Repair Products We Stock

Match the product to the load, the substrate, and the finish.
Every application has a standard product designed for it. Here are the categories we carry.

Cement and Concrete

Standard mixes in 60- and 80-pound bags cover sidewalks, steps, garden slabs, and post-setting. Quikrete 5000 delivers 5,000 psi for driveways, foundations, and anything carrying vehicle weight. Fast-Setting concrete sets in roughly 20 to 40 minutes, which is ideal for fence posts and mailboxes where bracing a wet pour overnight is not practical. Countertop mix uses a finer aggregate for smooth, decorative finishes and is available by special order. Rebar and remesh for reinforcing a slab are stocked alongside.

GraniteCrete

GraniteCrete is a binder that stabilizes decomposed granite into a firm, permeable paving surface. It holds together as a walking surface without the loose scatter of unbound DG, and water still passes through it, which suits paths, patios, and garden walkways on water-conscious projects. If you are weighing it against loose material, the path fines in our aggregate yard provide a similar look at a lower cost, though with higher maintenance needs.

Mortar, Plastic Cement and Color

Type S mortar in 80-pound bags handles structural masonry where tensile bond strength matters. We also carry 94-pound tan and white mortars for color matching, as well as polymer-modified Veneerstone mortar formulated for thin stone veneer. Thinset comes in regular and multipurpose formulations, available in gray or white. Grout mix for filling block cores and stone joints is in the same aisle.

Davis Color and Quikrete Color provide integral pigment for slabs, steps, and decorative pours. Bring a target color to the counter, and we will work through dosage with you, since the base mix shifts the finished result as much as the pigment does. Stains and sealers for finishing a colored pour are stocked here too.

Repair and Specialty Products

Anchoring cement sets railings, posts, and bolts into concrete. Water-Plug stops active leaks in masonry.

Vinyl patch and concrete resurfacer handle worn or spalled surfaces. Self-leveling compound is stocked in regular and fast-setting. Blacktop patch, a cold asphalt product, repairs driveways and lots without a hot mix crew.

Choosing a Mix

Match the mix to the load. Sidewalks, steps, and garden slabs run fine on standard mix. Driveways and foundations require a high-strength product. Posts and mailboxes need a fast-setting mix so you are not babysitting a pour.

Water is where most bagged concrete projects go wrong. Too much water measurably weakens the finished pour and increases the risk of cracking, so follow the ratio on the bag rather than mixing to whatever pours easily. Calculate your volume before coming in, as a second trip costs more than an extra bag. Mixing tubs, trowels, floats, and the rest of our masonry tools are available in the yard.

Why Contractors and Homeowners Choose Central Home Supply

Standard Mixes and High-Strength Products in Stock

We stock everything from 60-pound standard mixes to 5,000 psi structural mix on-site, available by the bag or pallet. Product availability keeps your pour on schedule, so a change of plans on Tuesday morning won't require waiting on a reorder.

Repair, Color, and Heavy-Duty Concrete Tools in Stock

We carry anchoring cement, resurfacer, self-leveling compound, integral pigment, thinset, grout, and all the mixing tubs, trowels, and floats to work them. Enjoy one counter, one ticket, and no second stop for forgotten items.

Forklift Delivery, Not Curbside

Bagged product ships palletized and weighs more than most people plan for. Our trucks handle the steep driveways and narrow roads typical of this terrain, and we set pallets where the crew is working. Shorter transit also means fewer missed deliveries and less risk to your schedule.

What Contractors and Homeowners Tell Us

Working Out What Your Pour Needs?

Bring your specifications or dimensions. We will calculate your required volume, match the mix to the load, include any color or reinforcement, and load your vehicle or schedule delivery during the same visit.

Get in Touch

Trust Badges & Accreditations

Frequently Asked Questions

What's the Difference Between Cement and Concrete?

What Is Portland Cement?

Which Mix Should I Use for My Project?

Match the mix to the load. Standard mix covers sidewalks, steps, and garden slabs. High-strength concrete is meant for driveways, foundations, and anything carrying vehicle weight. Fast-setting mix handles posts and mailboxes. Custom mix design matters most when strength requirements or environmental conditions are unusual; high-early-strength products are available for structural work that cannot wait for a standard cure.

Do Your Products Meet California Code and Seismic Requirements?

How Does Aggregate Quality Affect a Pour?

What Are Blended and Portland-Limestone Cements?

How Do I Use a Concrete Calculator to Estimate Bags?

Do You Carry Concrete Tools?

Do You Carry Concrete Repair Products?

Do You Sell to Contractors and Homeowners?

Bring the Spec, Leave With the Right Product

Bagged concrete, mortar, thinset, color, repair products, and the tools to work them, from a family-owned yard that has supplied this county for 50+ years. Bring your dimensions and we will work out the volume today.